3. MaskRom mode¶
See startup mode for an introduction startup mode
MaskRom pattern is the last line of defense equipment burn out. Forced entry
MaskRom involved hardware operation, have certain risk, so only in the equipment into the
Loader mode, can try
Please read carefully and operate carefully!
The operation steps are as follows:
Disconnect the device from the power supply
Hold the BOOT button on ITX-3588J or tweeze the two test points on Core-3588J (both shown below)
The device is plugged into the power supply and powered on
At this point, the device enters MaskRom mode.
the button of ITX-3588J
two test points of Core-3588J
At this point, the device should go into