MaskRom mode See startup mode for an introduction startup mode "MaskRom" pattern is the last line of defense equipment burn out. Forced entry "MaskRom" involved hardware operation, have certain risk, so only in the equipment into the "Loader" mode, can try "MaskRom" mode. Please read carefully and operate carefully! The operation steps are as follows: Disconnect the device from the power supply Hold the BOOT button on ITX-3588J or tweeze the two test points on Core-3588J (both shown below) The device is plugged into the power supply and powered on At this point, the device enters MaskRom mode. the button of ITX-3588J two test points of Core-3588J At this point, the device should go into "MaskRom mode".