2. Screen module¶
2.1. DM-M10R800 V2 MIPI module¶
2.1.1. Product parameters¶
model: M101014_BE45_A1
size: 10.1 inch
resolution: 800x1280
display interface: MIPI
visual Angle: 160°
touch screen: multi-point capacitive touch
2.1.2. Refer to the firmware¶
The official MIPI firmware default support MIPI_DSI0+HDMI display, MIPI screen connected to ROC-RK3568-PC-SE MIPI_DSI0 interfacei. Below is the link to the firmware: Firmware link
NOTE: When using HDMI display, there may be black edges on both sides of HDMI. The reason is HDMI as a secondary screen, will be scaled according to the aspect ratio of the main screen MIPI. If the aspect ratio of the two is inconsistent, it will lead to black edges.
2.1.3. Compile command¶
Using official SDK to compile firmware that support 10.1 inches screen firmware need the following command, the default compiled firmware is MIPI_DSI0+HDMI display:
./FFTools/make.sh -d rk3568-firefly-roc-pc-se-mipi101_M101014_BE45_A1 -j8 -l rk3568_firefly_roc_pc_se-userdebug
./FFTools/mkupdate/mkupdate.sh -l rk3568_firefly_roc_pc_se-userdebug
Note：If need to use CAM-8MS1M camera，first to add patch。
diff --git a/kernel/arch/arm64/boot/dts/rockchip/rk3568-firefly-roc-pc-se-mipi101_M101014_BE45_A1.dts b/kernel/arch/arm64/boot/dts/rockchip/rk3568-firefly-roc-pc-se-mipi101_M101014_BE45_A1.dts
index ae57644a105..0cb9124bec8 100644
--- a/kernel/arch/arm64/boot/dts/rockchip/rk3568-firefly-roc-pc-se-mipi101_M101014_BE45_A1.dts
+++ b/kernel/arch/arm64/boot/dts/rockchip/rk3568-firefly-roc-pc-se-mipi101_M101014_BE45_A1.dts
@@ -7,6 +7,15 @@
/dts-v1/;
#include "rk3568-firefly-roc-pc-se.dtsi"
+/*
+ * Select one of the three
+ * using single camera xc7160 ----> rk3568-firefly-roc-pc-se-cam-8ms1m.dtsi
+ * using dual camera gc2053/gc2093 ----> rk3568-firefly-roc-pc-se-cam-2ms2m.dtsi
+ */
+#include "rk3568-firefly-roc-pc-se-cam-8ms1m.dtsi"
+//#include "rk3568-firefly-roc-pc-se-cam-2ms2m.dtsi"
/ {
model = "ROC-RK3568-PC-SE MIPI M101014_BE45_A1 + HDMI(Android)";
2.1.4. Reference data¶
2.1.5. Real figure¶
