Welcome to ROC-RK3568-PC-SE Manual

ROC-RK3568-PC-SE

• Preface
  • Overview
  • OS version
  • Current version of the document
  • Revision record

Quick Start

• 1. Introduction
• 2. Senial debug
  • 2.1. Buy Adapter
  • 2.2. Hardware Connection
  • 2.3. Parameter Setting
  • 2.4. Use serial on Windows
  • 2.5. Use serial debug on Ubuntu

Upgrade Firmware

• 1. Introduction to updating firmware
  • 1.1. Preface
  • 1.2. Normal mode
  • 1.3. Upgrade mode
• 2. Upgrade the firmware via USB cable
  • 2.1. Introduction
  • 2.2. Preparatory Tools
  • 2.3. Upgrade the firmware
  • 2.4. FAQs
• 3. MaskRom mode
• 4. Switching Upgrade Storage
  • 4.1. Introduction
  • 4.2. Loader Mode
  • 4.3. Maskrom Mode
  • 4.4. FAQ
• 5. Upgrade the firmware via SD card
  • 5.1. Introduction
  • 5.2. Preparatory Tools
  • 5.3. Operation Steps

Linux

• 1. Compile Linux4.19 firmware
  • 1.1. Build the build environment
  • 1.2. Compile Ubuntu firmware
  • 1.3. Compile Yocto firmware
  • 1.4. Compile Debian Firmware
  • 1.5. Compile Buildroot firmware
• 2. Compile Linux5.10 firmware
  • 2.1. Build the build environment
  • 2.2. Compile Ubuntu firmware
  • 2.3. Compile Yocto firmware
  • 2.4. Compile Buildroot firmware
• 3. Compile Linux AMP firmware
  • 3.1. Overview
  • 3.2. Build the build environment
  • 3.3. Compile Ubuntu firmware
  • 3.4. Compile Buildroot firmware
• 4. Firefly Linux User Guide
• 5. Technical Case
  • 5.1. SSD boot

Android

• 1. ADB use
  • 1.1. Preface
  • 1.2. Adb Installation under Windows
  • 1.3. ADB installation on Ubuntu
  • 1.4. Frequently-used ADB Commands
  • 1.5. Application Manage
• 2. Compile environment to build
  • 2.1. Ready to compile
• 3. Compile Android11.0
  • 3.1. Android SDK
  • 3.2. ROC-RK3568-PC-SE product compilation method
  • 3.3. Manually compile ROC-RK3568-PC-SE Android 11.0
• 4. Firefly Android User Manual
• 5. FireflyApi2 Manual

Driver

• 1. ADC
  • 1.1. Introduction
  • 1.2. DTS configuration
  • 1.3. Drive instructions
  • 1.4. Interface specification
  • 1.5. Debug method
  • 1.6. FAQs
• 2. Camera
  • 2.1. MIPI CSI
  • 2.2. Full Mode Configuration
  • 2.3. Split Mode Configuration
  • 2.4. Related Directory
  • 2.5. Single Camera CAM-8MS1M/Dual Camera CAM-2MS2MF
  • 2.6. Camera Debug
  • 2.7. Android Use Camera App
  • 2.8. Linux Preview Camera
  • 2.9. IQ Files
• 3. I2C
  • 3.1. Introduction
  • 3.2. Define and register I2C devices
  • 3.3. Define and register I2C drivers
  • 3.4. FAQs
• 4. Ethernet
  • 4.1. DTS configure
  • 4.2. How to use dual ethernet
• 5. GPIO
  • 5.1. Introduction
  • 5.2. GPIO Pin to calculate
  • 5.3. input Output
  • 5.4. Interrupt
  • 5.5. Reuse
  • 5.6. FAQs
• 6. LED
  • 6.1. Introduction
  • 6.2. Controlling LEDs by device
  • 6.3. Using trigger control LED
• 7. PWM
  • 7.1. Introduction
  • 7.2. DTS configure
  • 7.3. Interface specification
  • 7.4. Debug method
  • 7.5. FAQs
• 8. RTC
  • 8.1. Introduction
  • 8.2. RTC驱动
  • 8.3. Interface usage
  • 8.4. FAQs
• 9. UART
  • 9.1. Introduction
  • 9.2. Pin definition
  • 9.3. DTS configuration
  • 9.4. Debug method
  • 9.5. How to configure UART2 as a normal serial port

Accessories

• 1. Conversion module
  • 1.1. USB to TTL serial module
• 2. Screen module
  • 2.1. DM-M10R800 V2 MIPI module
• 3. Camera Module
  • 3.1. CAM-8MS1M Monocular camera
  • 3.2. CAM-2MS2MF Binocular camera module
• 4. Wireless module
  • 4.1. EC20 4G Module suite
  • 4.2. EC200T 4G Module suite
  • 4.3. GNSS Module
• 5. Power adapter
  • 5.1. Product parameter
  • 5.2. picture
• 6. SATA Adapter
  • 6.1. Real figure
  • 6.2. ROC-RK3568-PC-SE connect to SATA storage device
• 7. HDMI TO MIPI CSI Drive Board

Other

• 1. Kernel
  • 1.1. Introduction
  • 1.2. Customize
  • 1.3. Compile
  • 1.4. Burning
• 2. U-Boot
  • 2.1. Introduction
  • 2.2. Compile
  • 2.3. Flash Image
  • 2.4. Verify that the new Loader is correctly upgraded
  • 2.5. Enter u-boot command line mode
  • 2.6. The secondary Loader
• 3. NPU
  • 3.1. RKNN Model
  • 3.2. RKNN-Toolkit-lite2
  • 3.3. Non-RKNN Model
  • 3.4. RKNN-Toolkit2
  • 3.5. Detailed Development Documents

Questions and answers

• 1. FAQS
  • 1.1. Build kernel, show “IO-Domain Checklist” Dialog
  • 1.2. Changes in kernel/buildroot configuration doesn’t take effect after compiling
  • 1.3. How to adjust HDMI output resolution manually ?
  • 1.4. The 3.5mm headphone jack is connected to the national standard headphone abnormal?
  • 1.5. What should I do if the boot is abnormal and restarts cyclically?
  • 1.6. What is the default username and password for Ubuntu?
  • 1.7. Write number tool to write SN, MAC address
  • 1.8. On Ubuntu system, if there is no sound after plugging in headphones, what should I do?
  • 1.9. How to make the system crawl LOG under Android?
  • 1.10. Problems encountered in compiling boot.img of Android

Hardware resources

• Interface definition
  • Interface definition of the whole machine
• Hardware Documents