一、Introduction

Product introduction

CAM-8MS1M(IMX415) is a 1/2.8” industrial-grade HD WDR sensor, suitable for various complex light environments.MIPI standard interface, supports 7x24h operating.It is mainly used in scenarios such as face recognition access control, face recognition attendance, gate machines and identification machines. _images/imx415.jpg

Shipping list

_images/imx415_shop_list_en.jpg

Detailed parameters

Parameters
Camera CAM-8MS1M(IMX415)
CMOS Sensor 1/2.8 sensor/RGB
Max Resolution 3840(H) x 2160(V) (16:9 mode)
Sensor Pixel Size 1.45um x 1.45um
Low Lux ≤0.5Lux/F2.0
Image Transmission Rate 3840x2160/60fps
SNR TBD
WDR TBD
FOV D:120.3° H: 111° V: 76.4°
Aperture F2.0
Focal Length 1.95mm
Distortion TV Distortion<-3.3%
Lens CRA TBD
Lens Temperature Range -20° /+60°
Lens structure 1G5P
Video Output Format RAW10/RAW12
IR NC
Power Supply 5V,Ripple not higher than 100mv.
Connection Way 0.5mm FPC
(SV-AJ38-TQ REV1.0 is 30pins, Board needs to be based on the hardware interface)
Power Consumption TBD
Operating Temperature -10° C ~ +55° C (Humidity : 10%RH ~ 75%RH)
Storage Temperature -20° C~ +65° C (Humidity : 10%RH ~75%RH)

二、Usage

Hardware connection

The Firefly development board has two MIPI CSI interfaces, one is a 30pin interface and the other is a 24pin interface. When connecting, please pay attention to the direction and connect only to the corresponding pin number interface. The CAM-8MS1M(IMX415) supports the 30pin interface. Here is a unified interface diagram:

30pin MIPI CSI Interface Connection

_images/interface_30pin.jpg

Note: Do not connect to an interface with the words MIPI DSI as this may cause damage to the module or development board.

CPU Board
RK3566 AIO-3566JD4, ROC-RK3566-PC
RK3568 AIO-3568J, ROC-RK3568-PC, ROC-RK3568-PC SE
RK3588 ITX-3588J,ROC-RK3588S-PC, AIO-3588SJD4 ,AIO-3588Q
RK3576 ROC-RK3576-PC, AIO-3576-JD4，AIO-3576Q

三、Firmware and Resource download

Related documents and firmware download, see the official website Resource Download