11. 4G 模组使用¶
查看 EC20 4G 模组套件是否已经加载
#加载成功会出现以下 4 个 USB 接口
ls /dev/ttyUSB*
/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/ttyUSB3
如果没有加载成功，请检查内核是否打开以下的配置
Symbol: USB_SERIAL_OPTION [=y]
Type : tristate
Prompt: USB driver for GSM and CDMA modems
Location:
-> Device Drivers
-> USB support (USB_SUPPORT [=y])
-> USB Serial Converter support (USB_SERIAL [=y])
Defined at drivers/usb/serial/Kconfig:558
Depends on: USB_SUPPORT [=y] && USB [=y] && USB_SERIAL [=y]
Selects: USB_SERIAL_WWAN [=y]
如果4G模块上不了网，请检查内核是否打开以下配置
CONFIG_USB_USBNET
CONFIG_USB_NET_QMI_WWAN
查看EC20 4G网卡是否存在
ifconfig wwan0
EC20 4G 模组插 SIM 卡上网方法
# 从资料下载界面下载 ec20-armhf.tar.gz 压缩包并拷贝到开发板上解压
# 需要将文件夹的/ec20-armhf/usr/share/udhcpc/default.script替换掉系统的/usr/share/udhcpc/default.script
# 结果如下：
[root@RV1126_RV1109:/userdata/ec20-armhf]# quectel-CM &
[root@RV1126_RV1109:/userdata/ec20-armhf]# [04-20_14:27:04:405] Quectel_Linux_ConnectManager_SR01A01V21
[04-20_14:27:04:406] quectel-CM profile[1] = (null)/(null)/(null)/0, pincode = (null)
[04-20_14:27:04:407] Find qmichannel = /dev/cdc-wdm0
[04-20_14:27:04:407] Find usbnet_adapter = wwan0
[04-20_14:27:04:422] cdc_wdm_fd = 7
[04-20_14:27:05:422] QmiThreadSendQMITimeout pthread_cond_timeout_np=110, errno: 2 (No such file or directory)
[04-20_14:27:06:520] Get clientWDS = 19
[04-20_14:27:06:552] Get clientDMS = 1
[04-20_14:27:06:584] Get clientNAS = 3
[04-20_14:27:06:617] Get clientUIM = 1
[04-20_14:27:06:648] Get clientWDA = 1
[04-20_14:27:06:681] requestBaseBandVersion EC20CFDR02A07M4G 1 [Nov 10 2016 17:00:00]
[04-20_14:27:06:743] requestGetSIMStatus SIMStatus: SIM_READY
[04-20_14:27:06:777] requestGetProfile[1] cmnet///0
[04-20_14:27:06:808] requestRegistrationState2 MCC: 460, MNC: 0, PS: Attached, DataCap: LTE
[04-20_14:27:06:839] requestQueryDataCall ConnectionStatus: DISCONNECTED
[04-20_14:27:06:904] requestRegistrationState2 MCC: 460, MNC: 0, PS: Attached, DataCap: LTE
[04-20_14:27:07:447] requestSetupDataCall WdsConnectionIPv4Handle: 0x87205120
[04-20_14:27:07:513] requestQueryDataCall ConnectionStatus: CONNECTED
udhcpc: started, v1.27.2
Failed to kill daemon: No such file or directory
udhcpc: sending discover
udhcpc: sending select for 10.154.101.71
udhcpc: lease of 10.154.101.71 obtained, lease time 7200
Failed to kill daemon: No such file or directory
[04-20_14:27:07:729] deleting routers
[04-20_14:27:07:772] adding dns 221.179.38.7
[04-20_14:27:07:772] adding dns 120.196.165.7
[root@RV1126_RV1109:/userdata/ec20-armhf]#ifconfig wwan0
wwan0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.154.101.71 P-t-P:10.154.101.71 Mask:255.255.255.240
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:612 (612.0 B) TX bytes:656 (656.0 B)