MaskRom Mode

Introduction

MaskRom mode is the bottom line preventing the device from bricking. Enforcing device into MaskRom mode involves hardware operation, which is risky. Therefore, please try to put the device into Loader mode, or boot the device with sd-card, before risking MaskRom mode. Please read and operate with great care!

AIO-3128C enter MaskRom mode

principle：Artificial to the Flash data pin connected to ground, the system will think Flash data error, so clearing the Flash data.

  1. Power down the device.

  2. Plug out SD card.

  3. Use a Dual male USB data cable to connnect device and host pc.

  4. Use metal tweezers to turn on the two test points shown on the red board on the core board as shown below.

  5. Power on the board.

  6. Wait a moment, then release the metal tweezers.

Older version (V1.1): _images/maskrom1.png

New version (V1.2): _images/maskrom2.png

Device should enter MaskRom mode:

_images/win_3128_tool_maskrom.png