Welcome to EC-R3588SPC Manual

Quick Start

• 2. Serial debug

Upgrade Firmware

• 1. Boot mode description
  • 1.1. Preface
  • 1.2. How to get the Firmwares
  • 1.3. Upgrade method
  • 1.4. Boot media
  • 1.5. Boot mode
• 2. Upgrade the firmware via USB cable
  • 2.1. Introduction
  • 2.2. Preparatory Tools
  • 2.3. Prepare Firmware
  • 2.4. Install the Upgrade Tool
  • 2.5. Enter Upgrade mode
  • 2.6. Upgrade the firmware
  • 2.7. FAQs
• 3. MaskRom mode
• 4. Upgrade the firmware via SD card
  • 4.1. Introduction
  • 4.2. Preparatory Tools
  • 4.3. Operation Steps

Linux

• 1. Compile Linux firmware
  • 1.1. Download Firefly_Linux_SDK
  • 1.2. Linux SDK Configuration introduction
  • 1.3. Compile Ubuntu firmware
  • 1.4. Compile Debian firmware
  • 1.5. Compile Buildroot firmware
• 2. Firefly Linux User Guide
• 3. Technical Case
  • 3.1. PaddlePaddle FastDeploy
  • 3.2. Android in Container
  • 3.3. Rockit AVS

Android

• 1. ADB use
  • 1.1. Preface
  • 1.2. Adb Installation under Windows
  • 1.3. ADB installation on Ubuntu
  • 1.4. Frequently-used ADB Commands
  • 1.5. Application Manage
• 2. Compile environment to build
  • 2.1. Ready to compile
  • 2.2. Compilation FAQ
• 3. Compile Android12.0 firmware
  • 3.1. Download Android12.0 SDK
  • 3.2. EC-R3588SPC product compilation method
  • 3.3. Some Introduction about Compiling
  • 3.4. Partition image
  • 3.5. OTA Compilation
  • 3.6. FAQs
• 4. Firefly Android User Manual
• 5. FireflyApi2 Manual
• 6. Technical Case
  • 6.1. Virtual Hardware Technology
  • 6.2. Booting Systems from Multiple Storage Devices
  • 6.3. Multiscreen Out of Sync
  • 6.4. Multiscreen Splicing

Port Usage

• 1. CAN
  • 1.1. Introduction
  • 1.2. Hardware Connection
  • 1.3. DTS Configuration
  • 1.4. Communication
  • 1.5. More Command
  • 1.6. FAQS
• 2. Display
  • 2.1. EC-R3588SPC Displays the configuration of the interface
  • 2.2. EC-R3588SPC Dual scene configuration
  • 2.3. Debug method
• 3. Ethernet
  • 3.1. DTS configure
  • 3.2. How to use dual Ethernet
• 4. LED
  • 4.1. Introduction
  • 4.2. Controlling LEDs by device
  • 4.3. Using trigger control LED
• 5. RELAY
  • 5.1. Interface Diagram
  • 5.2. schematic diagram
  • 5.3. control
• 6. DIN
  • 6.1. Interface Diagram
  • 6.2. schematic diagram
  • 6.3. Detect
• 7. RTC
  • 7.1. Introduction
  • 7.2. Driver RTC
  • 7.3. Interface usage
  • 7.4. FAQs
• 8. SATA
  • 8.1. Introduction
  • 8.2. Software configuration
  • 8.3. Mount
  • 8.4. Read and write speed
• 9. UART
  • 9.1. Hardware interface
  • 9.2. DTS config
  • 9.3. RS232 send and receive
  • 9.4. RS485 send and receive
• 10. Watchdog
  • 10.1. Introduction
  • 10.2. DTS configuration
  • 10.3. usage

Accessories

• 1. Wireless module

Other

• 1. NPU
  • 1.1. RKNN Model
  • 1.2. Non-RKNN Model
  • 1.3. RKNN-Toolkit2
  • 1.4. Detailed Development Documents

Questions and answers

• 1. Linux Device Tree (DTS) Manual
  • 1.1. Find the Device Tree
  • 1.2. Modify the Device Tree
  • 1.3. Compile and Download

Hardware resources

• 1. Interface definition
  • 1.1. Interface definition of the whole machine