2. Screen module¶
2.1. DM-M10R800 V2 MIPI module¶
2.1.1. Product parameters¶
model: M101014_BE45_A1
size: 10.1 inch
resolution: 800x1280
display interface: MIPI
visual Angle: 160°
touch screen: multi-point capacitive touch
2.1.2. Refer to the firmware¶
The official MIPI firmware default support MIPI_DSI1+HDMI display, MIPI screen connected to AIO-3568J MIPI_DSI1 interface. Below is the link to the firmware: Firmware link
NOTE: When using HDMI display, there may be black edges on both sides of HDMI. The reason is HDMI as a secondary screen, will be scaled according to the aspect ratio of the main screen MIPI. If the aspect ratio of the two is inconsistent, it will lead to black edges.
2.1.3. Compile command¶
2.1.3.1. MIPI_DSI1 + HDMI¶
Using official SDK to compile firmware that support 10.1 inches screen firmware need the following command, this compiled firmware is MIPI_DSI1 + HDMI display + CAM-2MS2M camera:
Android
./FFTools/make.sh -d rk3568-firefly-aioj-ipc-mipi_M101014_BE45_A1 -j8 -l rk3568_firefly_aioj_ipc-userdebug
./FFTools/mkupdate/mkupdate.sh -l rk3568_firefly_aioj_ipc-userdebug
Linux
./build.sh ipc-m10r800-a3568j-ubuntu.mk
./build.sh
2.1.3.2. MIPI_DSI0¶
Android
If you need to use MIPI_DSI0 or MIPI_DSI1, you can refer to kernel/arch/arm64/boot/dts/rockchip/rk3568-firefly-aioj-mipi101_M101014_BE45_A1.dts. By default, it supports MIPI_DSI0 + HDMI + CAM-8MS1M camera module. The compilation command is:
./FFTools/make.sh -d rk3568-firefly-aioj-mipi101_M101014_BE45_A1 -j8 -l rk3568_firefly_aioj_mipi-userdebug
./FFTools/mkupdate/mkupdate.sh -l rk3568_firefly_aioj_mipi-userdebug
Note：If need to use CAM-2MS2M camera，first to add patch。
diff --git a/kernel/arch/arm64/boot/dts/rockchip/rk3568-firefly-aioj-mipi101_M101014_BE45_A1.dts b/kernel/arch/arm64/boot/dts/rockchip/rk3568-firefly-aioj-mipi101_M101014_BE45_A1.dts
index c3e14e5c031..71f39d23c3f 100755
--- a/kernel/arch/arm64/boot/dts/rockchip/rk3568-firefly-aioj-mipi101_M101014_BE45_A1.dts
+++ b/kernel/arch/arm64/boot/dts/rockchip/rk3568-firefly-aioj-mipi101_M101014_BE45_A1.dts
@@ -13,8 +13,8 @@
* using dual camera gc2053/gc2093 ----> rk3568-firefly-aioj-cam-2ms2m.dtsi
* using hdmi-in module rk628d ----> rk3568-firefly-aioj-tf-hdmi-mipi-rk628.dtsi
*/
-#include "rk3568-firefly-aioj-cam-8ms1m.dtsi"
-//#include "rk3568-firefly-aioj-cam-2ms2m.dtsi"
+//#include "rk3568-firefly-aioj-cam-8ms1m.dtsi"
+#include "rk3568-firefly-aioj-cam-2ms2m.dtsi"
//#include "rk3568-firefly-aioj-tf-hdmi-mipi-rk628.dtsi"
Linux
If you need to use MIPI_DSI0, then select one of the following mk files:
# Select one as you need:
# MIPI_DSI0 + CAM-8MS1M, buildroot
./build.sh aio-3568j-mipi-buildroot.mk
# MIPI_DSI0 + CAM-2MS2M, buildroot
./build.sh aio-3568j-mipi-2cam-buildroot.mk
# MIPI_DSI0 + CAM-8MS1M, ubuntu
./build.sh aio-3568j-mipi-ubuntu.mk
# MIPI_DSI0 + CAM-2MS2M, ubuntu
./build.sh aio-3568j-mipi-2cam-ubuntu.mk
# Start build
./build.sh
