3. Compile the Android5.1 firmware¶
3.1. Download the Android SDK¶
The source code package of the Android SDK is large (approximately 6.3G), and the source code package can be obtained by:
verify the MD5 code when the download is complete:
$md5sum ~/firefly_rk3288_rk3128_android5.1_git_20211216.7z.001
$md5sum ~/firefly_rk3288_rk3128_android5.1_git_20211216.7z.002
3d7a59a84e059cd55a68304d47a5462b firefly_rk3288_rk3128_android5.1_git_20211216.7z.001
1979bd263b51bec27ec10eceb500731b firefly_rk3288_rk3128_android5.1_git_20211216.7z.002
Once confirmed, you will be able to extract:
mkdir -p ~/proj/firefly_rk3288_android5.1
cd ~/proj/firefly_rk3288_android5.1
7z x ~/firefly_rk3288_rk3128_android5.1_git_20211216.7z.001 -r -o.
git reset --hard
You can update directly from gitlab in the future
git pull gitlab Firefly-RK3288:Firefly-RK3288
3.2. Complie¶
3.2.1. Overall Compilation¶
3.2.2. Compile step by step¶
Compile uboot
cd ~/proj/firefly_rk3288_android5.1/u-boot
make rk3288_defconfig
make -j8
Compile kernel
cd ~/proj/firefly_rk3288_android5.1/kernel
make firefly_defconfig
make -j8 firefly-rk3288-aio-3288j.img
Compile Android
cd ~/proj/firefly_rk3288_android5.1/
source build.sh
lunch rk3288_aio_3288j_box-userdebug
make -j8
./mkimage.sh
3.2.3. Build variation¶
The default target build variation (TARGET_BUILD_VARIANT) is userdebug. There are three common variations, user, userdebug and eng, their differences are:
user
Only install the modules whose label is user
Set the property ro.secure=1, and turn on the security check function
Set the property ro.debuggable=0, and turn off the application debugging function
Turn off the adb function by default
Turn on the Proguard obfuscator
Turn on the DEXPREOPT pre-compilation optimization
userdebug
Install the modules whose label is user or debug
Set the property ro.secure=1, and turn on the security check function
Set the property ro.debuggable=1, and turn on the application debugging function
Turn on the ADB function by default
Turn on the Proguard obfuscator
Turn on the DEXPREOPT pre-compilation optimization
eng
Install the modules whose label is user, debug or eng
Set the property ro.secure=0, and turn off the security check function
Set the property ro.debuggable=1, and turn on the application debugging function
Set the property ro.kernel.android.checkjni=1, and enable the JNI call checking
Turn on the adb function by default
Turn off the Proguard obfuscator
Turn off the DEXPREOPT pre-compilation optimization
If the target build variation is user, the adb cannot get the root privileges.If you want to select a target build variation, you can add the parameters at the make command line, for example:
make -j8 PRODUCT-rk3288_aio_3288j_box-user
make -j8 PRODUCT-rk3288_aio_3288j_box-userdebug
make -j8 PRODUCT-rk3288_aio_3288j_box-eng
3.3. Flash the partition image¶
The ./mkimage.sh from the previous step will repack the boot.img and system.img and copy other related image files to the rockdev/Image-rk3288_aio_3288j_box/ directory. The following lists the image files used by the general firmware:
boot.img ：the initial file image for Android is responsible for initializing and loading the system partition.
kernel.img ：kernel image.
misc.img ：misc partition image is responsible for initiating the mode switching and passing the parameter in the emergency mode.
recovery.img ：image in the emergency mode.
resource.img ：resource image, which contains the boot image and the device tree blob information of the kernel.
system.img ：system partition image for Android, it is ext4 file system format.
Please refer to upgrade_firmware to flash the partition image file.If the Windows system is used, you can copy the image file above to the rockdev\Image directory of the AndroidTool (firmware upgrade tool under Windows), and then refer to the upgrade document to flash the partition image, the benefit is to use the default configuration without modifying the path of the file.
3.4. Pack into a unified firmware update.img¶
After compiling, you can use the script of Firefly to pack into the unified firmware, the command is:
./FFTools/mkupdate/mkupdate.sh -l rk3288_aio_3288j_box-userdebug
The firmware is generated in the rockdev/Image-rk3288_aio_3288j_box/ directory after packing.
It is easy to pack the unified firmware update.img under Windows, you can copy the file to the rockdev\Image directory of the AndroidTool by following the previous steps, and then run the mkupdate.bat batch file in the rockdev directory to create the update.img and save it to the rockdev\Image directory.
The update.img is easy to release the firmware and is used for upgrading the system by the end user. It is convenient to use a partition image for general development.