Logo ROC-RK3506J-CC Manual
2.0

Quick Start

  • 1. Introduction
  • 2. Serial debug

Upgrade Firmware

  • 1. Boot mode description
  • 2. Upgrade the firmware via USB cable
  • 3. MaskRom mode

Linux

  • 1. Compile Linux firmware
  • 2. Compile Linux AMP firmware
  • 3. Firefly Linux User Guide

Port Usage

  • 1. ADC
  • 2. CAN
  • 3. Display
  • 4. Ethernet
  • 5. GPIO
  • 6. LED
  • 7. PWM
  • 8. RTC
  • 9. UART
  • 10. Watchdog
  • 11. Sound Card

Accessories

  • 1. Screen module

Questions and answers

  • 1. Linux Device Tree (DTS) Manual

Hardware resources

  • 1. Interface definition

Resource download

ROC-RK3506J-CC Manual
ROC-RK3506J-CC
Spec Buy

ROC-RK3506J-CC is equipped with Rockchip's new chip RK3506J, 22nm advanced process technology, integrating three-core ARM Cortex-A7 plus single-core Cortex-M0, with a main frequency of up to 1.5GHz. Supporting AMP multi-core heterogeneous architecture, one chip can support flexible combinations of Linux, RTOS, and Bare-metal, such as 2×Cortex-A7 Linux + 1×Cortex-A7 RTOS + Cortex-M0 HAL or 3×Cortex-A7 RTOS + Cortex-M0 HAL, etc., using the standard RPMsg inter-core communication mechanism. The SDK natively supports the LVGL lightweight UI framework, and combined with the chip's internal 2D hardware acceleration, LVGL runs more smoothly, from hardware power-on to boot program loading and kernel loading, and finally to UI display, full-link startup optimization.

  • Docs »
  • <no title>
  • View page source

Previous

© Copyright 2022, Firefly Team.

Built with Sphinx using a theme provided by Read the Docs.
×