Welcome to Core-3588SG Manual

Quick Start

• 1. Introduction
  • 1.1. The AIO-3588SG standard kit contains the following accessories (for reference only):
• 2. Things to know before use
  • 2.1. power supply
  • 2.2. display
  • 2.3. ADB
• 2. Serial debug

Upgrade Firmware

• 1. Boot mode description
  • 1.1. Preface
  • 1.2. How to get the Firmwares
  • 1.3. Upgrade method
  • 1.4. Boot media
  • 1.5. Boot mode
• 2. Upgrade the firmware via USB cable
  • 2.1. Introduction
  • 2.2. Preparatory Tools
  • 2.3. Prepare Firmware
  • 2.4. Install the Upgrade Tool
  • 2.5. Enter Upgrade mode
  • 2.6. Upgrade the firmware
  • 2.7. FAQs
• 3. MaskRom mode
• 4. Upgrade the firmware via SD card
  • 4.1. Introduction
  • 4.2. Preparatory Tools
  • 4.3. Operation Steps

Linux

• 1. Compile Linux firmware
  • 1.1. Download Firefly_Linux_SDK
  • 1.2. Linux SDK Configuration introduction
  • 1.3. Compile Ubuntu firmware
  • 1.4. Compile Debian firmware
  • 1.5. Compile Buildroot firmware
• 2. Firefly Linux User Guide
• 3. Technical Case
  • 3.1. PaddlePaddle FastDeploy
  • 3.2. Android in Container
  • 3.3. Rockit AVS

Android

• 1. ADB use
  • 1.1. Preface
  • 1.2. Adb Installation under Windows
  • 1.3. ADB installation on Ubuntu
  • 1.4. Frequently-used ADB Commands
  • 1.5. Application Manage
• 2. Compile environment to build
  • 2.1. Ready to compile
  • 2.2. Compilation FAQ
• 3. Compile Android12.0 firmware
  • 3.1. Download Android12.0 SDK
  • 3.2. Core-3588SG product compilation method
  • 3.3. Some Introduction about Compiling
  • 3.4. Partition image
  • 3.5. OTA Compilation
  • 3.6. FAQs
• 4. Firefly Android User Manual
• 5. FireflyApi2 Manual
• 6. Technical Case
  • 6.1. Virtual Hardware Technology
  • 6.2. Booting Systems from Multiple Storage Devices
  • 6.3. Multiscreen Out of Sync
  • 6.4. Multiscreen Splicing

Port Usage

• 1. ADC
  • 1.1. Hardware interface
  • 1.2. Introduction
  • 1.3. DTS configuration
  • 1.4. Drive instructions
  • 1.5. Interface specification
  • 1.6. Debug method
  • 1.7. FAQs
• 2. BATTERY
  • 2.1. Introduction
  • 2.2. Fuel Gauge Software Configuration
• 3. Camera
  • 3.1. MIPI CSI
  • 3.2. Full Mode Configuration
  • 3.3. Split Mode Configuration
  • 3.4. Related Directory
  • 3.5. Single Camera CAM-8MS1M/Dual Camera CAM-2MS2MF
  • 3.6. Camera Debug
  • 3.7. Android Use Camera App
  • 3.8. Linux Preview Camera
  • 3.9. IQ Files
• 4. Display
  • 4.1. AIO-3588SG Displays the configuration of the interface
  • 4.2. Debug method
• 5. Ethernet
  • 5.1. DTS configure
• 6. GPIO
  • 6.1. Introduction
  • 6.2. GPIO Pin to calculate
  • 6.3. input Output
  • 6.4. Interrupt
  • 6.5. Reuse
  • 6.6. Debugging method
  • 6.7. FAQs
• 7. I2C
  • 7.1. Introduction
  • 7.2. i2cdetect command
  • 7.3. i2cdump command
  • 7.4. i2cget command
  • 7.5. i2cset command
• 8. LED
  • 8.1. Introduction
  • 8.2. Controlling LEDs by device
  • 8.3. Using trigger control LED
• 9. RTC
  • 9.1. Introduction
  • 9.2. Driver RTC
  • 9.3. Interface usage
  • 9.4. FAQs
• 10. SPI
  • 10.1. Introduction
  • 10.2. How SPI works
  • 10.3. Drive coding
  • 10.4. Interface usage
  • 10.5. FAQs
• 11. UART
  • 11.1. Hardware interface
  • 11.2. DTS config
  • 11.3. UART send and receive
• 12. Watchdog
  • 12.1. Introduction
  • 12.2. DTS configuration
  • 12.3. usage

Accessories

• 1. Camera module

Questions and answers

• 1. Linux Device Tree (DTS) Manual
  • 1.1. Find the Device Tree
  • 1.2. Modify the Device Tree
  • 1.3. Compile and Download

Hardware resources

• 1. Interface definition
  • 1.1. Interface definition of the whole machine