Getting Started

Interface definition of the whole machine

AIO-3328-JD4 provides a wealth of interfaces, including: power interface, 1 x USB3.0 (device), 5 x USB2.0 (interface ×4, seat ×1), HDMI display interface, Ethernet, WIFI antenna, bluetooth antenna, power button, 3.5mm headphone interface, RTC power interface, 12v power interface, IR interface, TF card slot, SIM card slot, loudspeaker interface, recovery key, and debugging serial port. The details are as follows: _images/interface_front.jpg

_images/interface_back.jpg

Special interface specification

The LVDS interface, TP touch interface, backlight interface, screen voltage jumper interface, MIC interface and MIPI interface in mb-jd4-rk3328&px30 baseboard are designed to support PX30 core board, so RK3328 core board cannot use these interfaces

Accessories required for Begin

  • AIO-3328-JD4 core board ×1

  • MB-JD4-RK3328&PX30 baseboard ×1

  • brass antenna ×1

  • 12V-2A Power adapter ×1

  • Type-a to Type-c data line

In addition, you may need the following accessories during use:

  • Display device

    • Monitor or TV with HDMI interface and HDMI cable

  • Network

    • 100M/1000M Ethernet cable, and wired router

    • WiFi router

  • Input devices

    • USB wireless/wired mouse/keyboard

    • infrared remote control (need to connect to the infrared receiver)

  • firmware upgrade and debugging

    • Dual male usb data cable

    • serial port to USB adapter.

  • Shipping list reference

Power on

Follow these steps:

  1. Plug in an HDMI cable, USB mouse, or keyboard (optional).

  2. Check that everything is connected properly, then power up the power adapter

When you turn it on, the blue power indicator lights up and you can see the Firefly logo.