Compile Linux Firmware (kernel-6.1) Download the SDK Please contact sales@t-firefly.com to get SDK download link. Notice: 1. SDK use cross-compilation, so use SDK in x86_64 PC, do not download SDK to the device 2. We suggest to use Ubuntu20.04 (real PC or docker) to build, other OS may cause building failure 3. Do not place or decompress the SDK archive in Virtual Machine share folder or non-english folder 4. Please use the regular user to get/compile the SDK, use root privilege may cause building failure Prepare a empty folder to place the SDK, we suggest a folder under your home dir. For example "~/proj" Verify and Decompress Verify the MD5 of SDK archives after download. $ md5sum rk3562_6.1.tgz.split* Compare the results with the md5sum.txt, if MD5s are the same, you can decompress now: # decompress cd ~/proj/ cat rk3562_6.1.tgz.split0* | tar -zx # you will get ~/proj/rk3562_6.1 # install python3 sudo apt update && sudo apt install python3 # check out files from repo cd ~/proj/rk3562_6.1 python3 .repo/repo/repo sync -l --no-tags SDK Introduction SDK Structure $ tree -L 1 . ├── app ├── buildroot # buildroot ├── build.sh -> device/rockchip/common/scripts/build.sh # building script ├── device # building system, includes building configs ├── docs # development documents ├── external # some components ├── kernel # linux kernel ├── Makefile -> device/rockchip/common/Makefile ├── prebuilt_rootfs # used to place pre-built rootfs ├── prebuilts # used to place cross-build toolchain ├── rkbin ├── rkflash.sh -> device/rockchip/common/scripts/rkflash.sh ├── tools # some tools └── u-boot # uboot About Configurations There are many config files (xxxx_defconfig) under "device/rockchip/rk3562/", these files control the building system. And their names will be like: __-__defconfig vendor: vendor of the product chip: soc the product used model: product model, means this config file is for that specific product. extra: some extra features, could be empty OS: the operating system that will be running in product About config file contents, take firefly_rk3562_aio- 3562jq_debian_defconfig as an example: RK_WIFIBT_CHIP="AP6256" RK_UBOOT_SPL=y RK_KERNEL_DTS_NAME="rk3562-firefly-aio-3562jq" # set the dts to be used during kernel compilation RK_KERNEL_CFG_FRAGMENTS="firefly_linux.config" # set the config fragments to be used during kernel compilation RK_UBOOT_CFG_FRAGMENTS="firefly-linux" # set the config fragments to be used during uboot compilation RK_PARAMETER="parameter-debian-fit.txt" # set the partition parameter RK_USE_FIT_IMG=y RK_RAMDISK_IMG="kernel/ramdisk.img" USE_EXTBOOT=y # use exlinux style boot.img RK_RECOVERY_RAMDISK="rk3562-recovery-arm64.cpio.gz" PREBUILT_ROOTFS_IMG="prebuilt_rootfs/rk3562_debian_rootfs.img" # set the prebuilt rootfs to be used RK_MISC_RECOVERY=y RK_EXTRA_PARTITION_NUM=1 Partitions Parameter file records the firmware partitions, for example "device/rockchip/rk3562/parameter-xxxxxx-fit.txt" FIRMWARE_VER: 1.0 MACHINE_MODEL: RK3562 MACHINE_ID: 007 MANUFACTURER: RK3562 MAGIC: 0x5041524B ATAG: 0x00200800 MACHINE: 0xffffffff CHECK_MASK: 0x80 PWR_HLD: 0,0,A,0,1 TYPE: GPT GROW_ALIGN: 0 CMDLINE: mtdparts=:0x00002000@0x00004000(uboot),0x00002000@0x00006000(misc),0x00040000@0x00008000(boot:bootable),0x00040000@0x00048000(recovery),0x00010000@0x00088000(backup),0x00c00000@0x00098000(rootfs),-@0x00c98000(userdata:grow) uuid:rootfs=614e0000-0000-4b53-8000-1d28000054a9 CMDLINE is what we need to focus on, in "0x00002000@0x00004000(uboot)", 0x00004000 is the start position of uboot, and 0x00002000 is the size of uboot partition. Start position + Partition size = Start position of the next partition. All partitions follow the same rule. And the unit of these hex numbers is "block", each block is 512 Byte, which means uboot partition size 0x00002000 is 8192 block = 8192 x 512 / 1024 / 1024 = 4 MiB Build Debian Firmware Preparations Run these two commands to install necessary tools sudo apt update sudo apt install repo git ssh make gcc libssl-dev liblz4-tool \ expect g++ patchelf chrpath gawk texinfo chrpath diffstat binfmt-support \ qemu-user-static live-build bison flex fakeroot cmake gcc-multilib g++-multilib \ unzip device-tree-compiler ncurses-dev p7zip-full Download rootfs here Debian Rootfs , please use rootfs under kernel-6.1 folder. After download, decompress and move the rootfs image to SDK/prebuilt_rootfs/, then create a symbolic link. # Decompress 7z x debian12_xxxx_rootfs_xxxx.7z # Move the rootfs image to sdk and then create a symbolic link. mv debian12_xxxx_rootfs_xxxx.img ./rk3562_6.1/prebuilt_rootfs/ cd ./rk3562_6.1/prebuilt_rootfs/ ln -sf debian12_xxxx_rtoofs_xxxx.img rk3562_debian_rootfs.img cd .. Configurations Run "./build.sh lunch" to list all available configs, enter a number to select. Please choose one with "debian" keyword: ./build.sh lunch ############### Rockchip Linux SDK ############### Manifest: rk3562_linux6.1_release_20241220_v1.0.0a.xml Log colors: message notice warning error fatal Log saved at /home4/lth/project/linux/rk3562_6.1/output/sessions/2024-12-25_18-03-39 Pick a defconfig: 1. rockchip_defconfig 2. firefly_rk3562_aio-3562jq_buildroot_defconfig 3. firefly_rk3562_aio-3562jq_debian_defconfig 4. firefly_rk3562_aio-3562jq_ubuntu_defconfig 5. rockchip_rk3562_dictpen_test3_v20_defconfig 6. rockchp_rk3562_evb1_lp4x_v10_amp_defconfig 7. rockchip_rk3562_evb1_lp4x_v10_defconfig 8. rockchip_rk3562_evb2_ddr4_v10_amp_defconfig 9. rockchip_rk3562_evb2_ddr4_v10_defconfig 10. rockchip_rk3562_robot_evb1_lp4x_v10_defconfig 11. rockchip_rk3562_robot_evb2_ddr4_v10_defconfig Which would you like? [1]: Compilation Full Compilation Run ./build.sh all The output firmware will be "output/update/update.img" Partial Compilation After a full compilation, if you modified kernel or uboot, you can do partial compilation to save time. Only build u-boot, will generate u-boot/uboot.img ./build.sh uboot Only build kernel, will generate kernel/extboot.img ./build.sh extboot Pack all parts to update.img ./build.sh updateimg Build Buildroot Firmware Preparations Run these two commands to install necessary tools sudo apt update sudo apt install repo git ssh make gcc libssl-dev liblz4-tool \ expect g++ patchelf chrpath gawk texinfo chrpath diffstat binfmt-support \ qemu-user-static live-build bison flex fakeroot cmake gcc-multilib g++-multilib \ unzip device-tree-compiler ncurses-dev Configurations Run "./build.sh lunch" to list all available configs, enter a number to select. Please choose one with "buildroot" keyword: ./build.sh lunch ############### Rockchip Linux SDK ############### Manifest: rk3562_linux6.1_release_20241220_v1.0.0a.xml Log colors: message notice warning error fatal Log saved at /home4/lth/project/linux/rk3562_6.1/output/sessions/2024-12-25_18-03-39 Pick a defconfig: 1. rockchip_defconfig 2. firefly_rk3562_aio-3562jq_buildroot_defconfig 3. firefly_rk3562_aio-3562jq_debian_defconfig 4. firefly_rk3562_aio-3562jq_ubuntu_defconfig 5. rockchip_rk3562_dictpen_test3_v20_defconfig 6. rockchp_rk3562_evb1_lp4x_v10_amp_defconfig 7. rockchip_rk3562_evb1_lp4x_v10_defconfig 8. rockchip_rk3562_evb2_ddr4_v10_amp_defconfig 9. rockchip_rk3562_evb2_ddr4_v10_defconfig 10. rockchip_rk3562_robot_evb1_lp4x_v10_defconfig 11. rockchip_rk3562_robot_evb2_ddr4_v10_defconfig Which would you like? [1]: Compilation Full Compilation Run ./build.sh all The output firmware will be "output/update/update.img" Partial Compilation After a full compilation, if you modified kernel or uboot, you can do partial compilation to save time. Only build u-boot, will generate u-boot/uboot.img ./build.sh uboot Only build kernel, will generate kernel/extboot.img ./build.sh extboot Pack all parts to update.img ./build.sh updateimg But if you modified buildroot, you need to do full compilation.