Welcome to ROC-RK3576-PC Manual

Quick Start

• 1. Introduction
• 2. Serial debug

Upgrade Firmware

• 1. Boot mode description
  • 1.1. Preface
  • 1.2. How to get the Firmwares
  • 1.3. Upgrade method
  • 1.4. Boot media
  • 1.5. Boot mode
• 2. Upgrade the firmware via USB cable
  • 2.1. Introduction
  • 2.2. Preparatory Tools
  • 2.3. Prepare Firmware
  • 2.4. Install the Upgrade Tool
  • 2.5. Enter Upgrade mode
  • 2.6. Upgrade the firmware
  • 2.7. FAQs
• 3. MaskRom mode
• 4. Upgrade the firmware via SD card
  • 4.1. Introduction
  • 4.2. Preparatory Tools
  • 4.3. Operation Steps

Linux

• 1. Compile Linux firmware
  • 1.1. Compile Ubuntu firmware
  • 1.2. Compile Yocto firmware
• 2. Firefly Linux User Guide

Android

• 1. ADB use
  • 1.1. Preface
  • 1.2. Adb Installation under Windows
  • 1.3. ADB installation on Ubuntu
  • 1.4. Frequently-used ADB Commands
  • 1.5. Application Manage
• 2. Compile environment to build
  • 2.1. Ready to compile
  • 2.2. Compilation FAQ
• 3. Compile Android14.0 firmware
  • 3.1. ROC-RK3576-PC product compilation method
  • 3.2. Some Introduction about Compiling
  • 3.3. Partition image
  • 3.4. OTA Compilation
  • 3.5. FAQs
• 4. Firefly Android User Manual
• 5. FireflyApi2 Manual
• 6. Technical Case
  • 6.1. Virtual Hardware Technology
  • 6.2. Booting Systems from Multiple Storage Devices
  • 6.3. Multiscreen Out of Sync
  • 6.4. Multiscreen Splicing

Port Usage

• 1. ADC
  • 1.1. Hardware interface
  • 1.2. Introduction
  • 1.3. DTS configuration
  • 1.4. Drive instructions
  • 1.5. Interface specification
  • 1.6. Debug method
  • 1.7. FAQs
• 2. Camera
  • 2.1. MIPI CSI
  • 2.2. Full Mode Configuration
  • 2.3. Camera Debug
  • 2.4. Android Use Camera App
  • 2.5. Linux Preview Camera
• 3. Display
  • 3.1. ROC-RK3576-PC Displays the configuration of the interface
  • 3.2. ROC-RK3576-PC Multiscreen scene configuration
  • 3.3. Debug method
• 4. Ethernet
  • 4.1. DTS configure
• 5. GPIO
  • 5.1. Introduction
  • 5.2. GPIO Pin to calculate
  • 5.3. input Output
  • 5.4. Interrupt
  • 5.5. Reuse
  • 5.6. Debugging method
  • 5.7. FAQs
• 6. LED
  • 6.1. Introduction
  • 6.2. Controlling LEDs by device
  • 6.3. Using trigger control LED
• 7. PWM
  • 7.1. Introduction
  • 7.2. DTS configure
  • 7.3. Interface specification
  • 7.4. Debug method
  • 7.5. FAQs
• 8. RTC
  • 8.1. Introduction
  • 8.2. Driver RTC
  • 8.3. Interface usage
  • 8.4. FAQs
• 9. SATA
  • 9.1. Introduction
  • 9.2. Software configuration
  • 9.3. Mount
  • 9.4. Read and write speed
• 10. UART
  • 10.1. Hardware interface
  • 10.2. DTS config
  • 10.3. UART send and receive
• 11. Watchdog
  • 11.1. Introduction
  • 11.2. DTS configuration
  • 11.3. usage

Accessories

• 1. Camera module
• 2. Screen module
• 3. Wireless module

Other

• 1. NPU
  • 1.1. RKNN Model
  • 1.2. Non-RKNN Model
  • 1.3. RKNN-Toolkit2
  • 1.4. Detailed Development Documents

Questions and answers

• 1. Linux Device Tree (DTS) Manual
  • 1.1. Find the Device Tree
  • 1.2. Modify the Device Tree
  • 1.3. Compile and Download

Hardware resources

• 1. Interface definition
  • 1.1. Interface definition of the whole machine