Screen module DM-M10R800 V2 MIPI module Product parameters model: M101014_BE45_A1 size: 10.1 inch resolution: 800x1280 display interface: MIPI panel material: IPS panel visual Angle: 160° touch screen: multi-point capacitive touch Refer to the firmware The official firmware name supporting the 10.1 screen has the word "MIPI". Below is the link to the firmware: Firmware link If you need to use the dual screen display function, please refer to the FAQ first Compile command ./FFTools/make.sh -d rk3566-roc-pc-mipi101_M101014_BE45_A1 -j8 -l rk3566_roc_pc_mipi-userdebug ./FFTools/mkupdate/mkupdate.sh -l rk3566_roc_pc_mipi-userdebug Note:If need to use CAM-8MS1M camera,first to add patch。 diff --git a/kernel/arch/arm64/boot/dts/rockchip/rk3566-roc-pc-mipi101_M101014_BE45_A1.dts b/kernel/arch/arm64/boot/dts/rockchip/rk3566-roc-pc-mipi101_M101014_BE45_A1.dts index ebbb5d1123f..71e82f8d9c0 100644 --- a/kernel/arch/arm64/boot/dts/rockchip/rk3566-roc-pc-mipi101_M101014_BE45_A1.dts +++ b/kernel/arch/arm64/boot/dts/rockchip/rk3566-roc-pc-mipi101_M101014_BE45_A1.dts @@ -7,6 +7,13 @@ /dts-v1/; #include "rk3566-roc-pc.dtsi" +/* + * Select one of the two + * using single camera xc7160 ----> rk3566-roc-pc-cam-8ms1m.dtsi + * using dual camera gc2053/gc2093 ----> rk3566-roc-pc-cam-2ms2m.dtsi + */ +#include "rk3566-roc-pc-cam-8ms1m.dtsi" +//#include "rk3566-roc-pc-cam-2ms2m.dtsi" / { model = "ROC-RK3566-PC MIPI101 M101014-BE45-A1(Android)"; Reference data [schematic of screen module Datasheet& adapter board] Real figure Front Back