Getting Started

Power on

Make sure the mainboard is correctly connected and power the ROC-
RK3308-CC with a USB Type-C cable. It can be connected either to power
adaptor or to  PC host. The working voltage is 5V and the working
current is over 500mA. When the board is powered on, it will booting
automatically. The red power indicator on the board is on as the
system starts up normally.

Instructions

The manufacturer firmware of ROC-RK3308-CC has integrated Baidu DuerOS
by default. For the first boot up, refer to

DuerOS

  section to setup ROC-RK3308-CC network. Then use DuerOS through the
Awaken words "小度，小度".

Serial debug

ROC-RK3308-CC debug serial port default Baud rate is 1500000 . Please
use a USB serial adaptor which support to work on 1500000bps,
furthermore, You can read the section

Serial Debug

 for more details.

Burning firmware

Burning the firmware for ROC-RK3308-CC can refer to the section

Burning Firmware

.

Four official basic firmware distribution are provided for ROC-
RK3308-CC:

Containing no phonetic algorithm: ROC-RK3308-CC

Containing Baidu Dueros speech: ROC-RK3308-CC_Dueros

Containing aispeech speech: ROC-RK3308-CC_aispeech

Containing iflytek speech: ROC-RK3308-CC_iflytek

Choosing the firmware according to your demand.

FAQ

For frequently asked questions , please refer to section

FAQ

.