1. Introduction 1.1 Product introduction 1.2 Detailed parameters 2. Usage 2.1 Hardware connection 2.1.1 30pin MIPI DSI Interface Connection Connection instructions: Due to variations in the silkscreen labels of different development boards, such as MIPI_DSI, MIPI-DSI, or DSI_MIPI, the default connection should be to the interface labeled with MIPI DSI. If the development board has multiple MIPI DSI interfaces, such as MIPI_DSI0, MIPI_DSI1, DSI0_MIPI, or DSI1_MIPI, the default connection should be to the interface labeled MIPI DSI0. Use the 30-pin same-side FPC cable , while in a powered-off state, connect it as shown in the diagram to the corresponding MIPI DSI interface on the board. Note: Do not connect to the "MIPI CSI" interface, as this may burn out the module or development board. Detailed Interface Definition Reference: 3. Firmware and Resource download Related documents and firmware download, see the official website Resource Download 4. Tutorial 4.1 Flash firmware 4.2 Compile the firmware RK3566 platform RK3568 platform RK3588 系列 RK3588S 系列 RK3576 系列