Getting start User manual Accessories The standard set of AIO-PX30-JD4 includes the following accessories: Core-PX30-JD4 main board ×1 MB-JD4-RK3328&PX30 base board ×1 Brass antenna ×1 12V-2A Power adapter ×1 Type-A to Type-C data cable ×1 Other optional accessories: Firefly Serial Module In addition, you may need the following accessories during use: Display device 10.1 inch LVDS screen Network 100M Ethernet cable, and wired router WiFi router Input devices USB wire/wireless mouse/keyboard Infrared remote control (need to connect to the infrared receiver) Firmware upgrade and debugging Type-A to Type-C data cable Serial port to USB adapter Firmware type Firmware comes in two formats: Raw firmware RK firmware(Rockchip firmware) Raw firmware is a firmware that can be upgraded to a storage device in a bit-by- bit replication mode. It is the original image of the storage device. Raw firmware is generally upgraded to an SD card, but it can also be upgraded to an eMMC. There are many tools available to upgrade the original firmware: RK firmware is a firmware packaged in Rockchip proprietary format and upgraded to eMMC flash memory using upgrade_tool(Linux) or AndroidTool(Windows) tools provided by Rockchip. RK firmware is Rockchip's traditional firmware packaging format and is often used on Android devices. In addition, Android's RK Firmware can be upgraded to an SD card using the SD Firmware Tool. Partition image is the image data of a partition and is used to store the upgrade of the corresponding partition of the device. For example, the compilation of the Android SDK will construct "boot.img", "kernel.img" and "system.img" etc. Partition image file ,the "kernel.img" will be written in eMMC or SD card "the kernel" partition. Download and update firmware The following is a list of supported systems: Android 8.1 Ubuntu 18.04 Choose the right tool to upgrade the firmware according to the operating system used: upgrade to SD Graphical interface upgrade tool: Etcher (windows/linux/Mac) Command line upgrade tool: dd (Linux) upgrade to eMMC Graphical interface upgrade tool: AndroidTool (Windows) Command line upgrade tool: upgrade_tool (Linux) Boot After confirming the correct connection of motherboard accessories, insert the power adapter into a live socket and the power line interface into the development board. The development board will automatically start up after the first power on. When the machine is turned on, the blue power indicator light will be on. If the board is connected to the LVDS monitor, you can see the official logo of Firefly. Senial debug Buy Adapter There are many USB adapter to serial port on the shop, divided by chip, there are the following: CP2104 PL2303 CH340 Note: The default baud rate of AIO-PX30-JD4 is 1500000, some USB to serial chip baud rate can not reach 1500000. The same chip may have different series, so be sure to confirm whether to support before purchasing. Hardware Connection Serial port to USB adapter, there are four pins: 3.3V Power, no need to connect. GND，Ground, connect to GND pin of the board. TXD，Transmit，connect to TX pin of the board. RXD，Receive, connect to RX pin of the board. Note: If you encounter the problem that TX and RX cannot input and output when using other serial adapters, you can try to exchange TX and RX connections. AIO-PX30-JD4 serial port connection diagram: Parameter Setting AIO-PX30-JD4 use the following serial parameters: Baud rate: 1500000 Data bit: 8 Stop bit: 1 Parity check: none Flow control: none Use serial on Windows Install Driver Download driver and install: CH340 PL2303 CP210X If you can’t use PL2303 normally on Win8, use 3.3.5.122 or older version of the old driver, please refer to This article . Please find drivers with version 3.3.5.122 or before. If you install the CP210X driver from the official website on the Windows system, you can set the serial port baud rate to 1500000 using tools such as PUTTY or SecureCRT. If you cannot set the baud rate or it is invalid, you can download the old version driver . After the adapter is inserted, the system will prompt for the discovery of new hardware and initialization, and then the corresponding COM port can be found in the device manager: Install Software Putty or SecureCRT are commonly used for Windows. Putty is open source software and SecureCRT is used in a similar way. Here to Download putty . (Recommended download putty.zip, it contains other useful tools.) Extract and run "PUTTY.exe". Select Connection type to Serial. Modify Serial line to the COM port found in the device manager. Set Speed to 1500000. Click Open button. Use serial debug on Ubuntu There are many options available on Ubuntu: minicom picocom kermit The following shows how to use minicom. Install minicom sudo apt-get install minicom To connect the serial port line, see what the serial port device file is. The following example is "/dev/ttyusb0": $ ls /dev/ttyUSB* /dev/ttyUSB0 Run: $ sudo minicom Welcome to minicom 2.7 OPTIONS: I18n Compiled on Jan 1 2014, 17:13:19. Port /dev/ttyUSB0, 15:57:00 Press CTRL-A Z for help on special keys Based on the above tips: Press "Ctrl-a" and then press "Z" again to bring up the help menu. +-------------------------------------------------------------------+ | Minicom Command Summary | | | | Commands can be called by CTRL-A | | | | Main Functions Other Functions | | | | Dialing directory..D run script (Go)....G | Clear Screen.......C | | Send files.........S Receive files......R | cOnfigure Minicom..O | | comm Parameters....P Add linefeed.......A | Suspend minicom....J | | Capture on/off.....L Hangup.............H | eXit and reset.....X | | send break.........F initialize Modem...M | Quit with no reset.Q | | Terminal settings..T run Kermit.........K | Cursor key mode....I | | lineWrap on/off....W local Echo on/off..E | Help screen........Z | | Paste file.........Y Timestamp toggle...N | scroll Back........B | | Add Carriage Ret...U | | | | Select function or press Enter for none. | +-------------------------------------------------------------------+ Press O to enter the setting interface, as follows: +-----[configuration]------+ | Filenames and paths | | File transfer protocols | | Serial port setup | | Modem and dialing | | Screen and keyboard | | Save setup as dfl | | Save setup as.. | | Exit | +--------------------------+ Move the cursor to "Serial port setup", press enter to enter the Serial port setup interface, then enter the letter prompted earlier, select the corresponding option, and set it as follows: +-----------------------------------------------------------------------+ | A - Serial Device : /dev/ttyUSB0 | | B - Lockfile Location : /var/lock | | C - Callin Program : | | D - Callout Program : | | E - Bps/Par/Bits : 1500000 8N1 | | F - Hardware Flow Control : No | | G - Software Flow Control : No | | | | Change which setting? | +-----------------------------------------------------------------------+ Note: "Hardware Flow Control" and "Software Flow Control" should be set to "No", otherwise it may not be impossible to input. After finishing the setting, go back to the previous menu and select "Save setup as dfl" to save as the default configuration, which will be used by default later.