Upgrade the firmware via SD card

Introduction

This article mainly introduced how to upgrade the firmware on the host
to the SD card, which needs to be selected according to the host
operating system.

Preparatory Tools

AIO-3568J

firmware

host computer

USB Card Reader

MIrcoSD card

SD_Firmware_Tool

Operation Steps

Insert microSD card into USB card reader and then into USB port of
host computer

Run SD_Firmware_Tool, check the "Upgrade Firmware" box and select the
correct removable disk device

Choose firmware we want to upgrade into the AIO-3568J

Click  button Create to make it and wait until it is finshed


Remove the microSD card, insert it into the microSD card slot of the
motherboard, power on the board, it will start upgrading automatically

After the upgrade, remove the microSD card and restart the motherboard
automatically to complete the whole process of firmware update