SATA Adapter

AIO-3566JD4 needs  SATA Adapter module when using the SATA storage
device. The SATA Adapter fits all series mainboards of Firefly with
FPC SATA interface, can be connected to 2.5'' or 3.5'' SSD/HDD, and it
uses FPC ribbon cable, with aluminum foil shielding, minimizes signal
interference


Real figure

SATA Adapter front

SATA Adapter back

AIO-3566JD4 connect to SATA storage device


Note:

 in order to prevent the situation from burning out, please turn off
the power of the AIO-3566JD4 first and then connect the SATA storage
device

(The public firmware turns off SATA by default)

enable SATA

Since SATA and m.2 PCIe functions on AIO-3566JD4 are multiplexed, the
enabling SATA is modified as follows:

   --- a/kernel/arch/arm64/boot/dts/rockchip/rk3566-firefly-aiojd4.dtsi
   +++ b/kernel/arch/arm64/boot/dts/rockchip/rk3566-firefly-aiojd4.dtsi
   @@ -173,11 +173,11 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pcie_reset_gpio>;
        /delete-property/ vpcie3v3-supply;
   -    status = "okay";
   +    status = "disabled";
    };

    &sata2 {
   -    status = "disabled";
   +    status = "okay";
    };