Screen module

DM-M10R800 V2 MIPI module

Product parameters

model: M101014_BE45_A1

size: 10.1 inch

resolution: 800x1280

display interface: MIPI

panel material: IPS panel

visual Angle: 160°

touch screen: multi-point capacitive touch

Refer to the firmware

The official firmware name supporting the 10.1 screen has the word
"MIPI". Below is the link to the firmware:

Dual MIPI Firmware link

Note: Because RK3566 Dual screen Display uses the same internal input
Source, that is, "VOP" is the "Same Source, Dual Display", so if MIPI
screen is used as the main screen, the HDMI screen of the secondary
screen will stretch, so if you  want to avoid this problem.  Both the
primary and secondary screens should be in the same direction
(horizontal and vertical) with the same resolution.

Compile command

   ./FFTools/make.sh -d rk3566-firefly-aiojd4-mipi101_M101014_BE45_A1 -j8 -l rk3566_firefly_aiojd4_mipi-userdebug
   ./FFTools/mkupdate/mkupdate.sh -l rk3566_firefly_aiojd4_mipi-userdebug

Reference data

[schematic of screen module Datasheet& adapter board]

Real figure

Front

MIPI DSI0

MIPI DSI1