Welcome to Core-3566JD4 Manual

Core-3566JD4

• Preface
  • Overview
  • OS version
  • Current version of the document
  • Revision record

Quick Start

• 1. Introduction
  • 1.1. The standard package of AIO-3566JD4 includes the following accessories:
  • 1.2. Shipping list (for reference only)
  • 1.3. Accessories
• 2. Senial debug
  • 2.1. Buy Adapter
  • 2.2. Hardware Connection
  • 2.3. Parameter Setting
  • 2.4. Use serial on Windows
  • 2.5. Use serial debug on Ubuntu

Upgrade Firmware

• 1. Introduction to updating firmware
  • 1.1. Preface
  • 1.2. Normal mode
  • 1.3. Upgrade mode
• 2. Upgrade the firmware via USB cable
  • 2.1. Introduction
  • 2.2. Preparatory Tools
  • 2.3. Upgrade the firmware
  • 2.4. FAQs
• 3. MaskRom mode
• 4. Switching Upgrade Storage
  • 4.1. Introduction
  • 4.2. Loader Mode
  • 4.3. Maskrom Mode
  • 4.4. FAQ
• 5. Upgrade the firmware via SD card
  • 5.1. Introduction
  • 5.2. Preparatory Tools
  • 5.3. Operation Steps

Linux

• 1. Compile Linux4.19 firmware
  • 1.1. Build the build environment
  • 1.2. Compile Ubuntu firmware
  • 1.3. Compile Yocto firmware
  • 1.4. Compile Debian Firmware
  • 1.5. Compile Buildroot firmware
• 2. Compile Linux5.10 firmware
  • 2.1. Build the build environment
  • 2.2. Compile Ubuntu firmware
  • 2.3. Compile Yocto firmware
  • 2.4. Compile Buildroot firmware
• 3. Firefly Linux User Guide
• 4. Technical Case
  • 4.1. SSD boot

Android

• 1. ADB use
  • 1.1. Preface
  • 1.2. Adb Installation under Windows
  • 1.3. ADB installation on Ubuntu
  • 1.4. Frequently-used ADB Commands
  • 1.5. Application Manage
• 2. Compile environment to build
  • 2.1. Ready to compile
• 3. Compile Android11.0
  • 3.1. Android SDK
  • 3.2. Core-3566JD4 product compilation method
  • 3.3. Manually compile Core-3566JD4 Android 11.0
• 4. Firefly Android User Manual
• 5. FireflyApi2 Manual

Driver

• 1. ADC
  • 1.1. Introduction
  • 1.2. DTS configuration
  • 1.3. Drive instructions
  • 1.4. Interface specification
  • 1.5. Debug method
  • 1.6. FAQs
• 2. Camera
  • 2.1. MIPI CSI
  • 2.2. Full Mode Configuration
  • 2.3. Split Mode Configuration
  • 2.4. Related Directory
  • 2.5. Single Camera CAM-8MS1M/Dual Camera CAM-2MS2MF
  • 2.6. Camera Debug
  • 2.7. Android Use Camera App
  • 2.8. Linux Preview Camera
  • 2.9. IQ Files
• 3. I2C
  • 3.1. Introduction
  • 3.2. Define and register I2C devices
  • 3.3. Define and register I2C drivers
  • 3.4. FAQs
• 4. IR
  • 4.1. Infrared remote control configuration
  • 4.2. Kernel driver
  • 4.3. IR use
• 5. LCD
  • 5.1. 简介
  • 5.2. Config Configuration
  • 5.3. MIPI DTS Configuration
  • 5.4. EDP DTS configuration
• 6. GPIO
  • 6.1. Introduction
  • 6.2. GPIO Pin to calculate
  • 6.3. input Output
  • 6.4. Interrupt
  • 6.5. Reuse
  • 6.6. FAQs
• 7. LED
  • 7.1. Introduction
  • 7.2. Controlling LEDs by device
  • 7.3. Using trigger control LED
• 8. PWM
  • 8.1. Introduction
  • 8.2. DTS configure
  • 8.3. Interface specification
  • 8.4. Debug method
  • 8.5. FAQs
• 9. RTC
  • 9.1. Introduction
  • 9.2. RTC驱动
  • 9.3. Interface usage
  • 9.4. FAQs
• 10. UART
  • 10.1. Introduction
  • 10.2. DTS configuration
  • 10.3. Debug method

Accessories

• 1. Conversion module
  • 1.1. USB to TTL serial module
• 2. Screen module
  • 2.1. DM-M10R800 V2 MIPI module
• 3. Camera Module
  • 3.1. CAM-8MS1M Monocular camera
  • 3.2. CAM-2MS2MF Binocular camera module
• 4. Wireless module
  • 4.1. EC20 4G Module suite
  • 4.2. EC200T 4G Module suite
  • 4.3. GNSS Module
• 5. Power adapter
  • 5.1. Product parameter
  • 5.2. picture
• 6. Remote control
  • 6.1. Product Parameter
  • 6.2. Picture
  • 6.3. Key code
• 7. SATA Adapter
  • 7.1. Real figure
  • 7.2. AIO-3566JD4 connect to SATA storage device
  • 7.3. enable SATA
• 8. HDMI TO MIPI CSI Drive Board

Other

• 1. Kernel
  • 1.1. Introduction
  • 1.2. Customize
  • 1.3. Compile
  • 1.4. Burning
• 2. U-Boot
  • 2.1. Introduction
  • 2.2. Compile
  • 2.3. Flash Image
  • 2.4. Verify that the new Loader is correctly upgraded
  • 2.5. Enter u-boot command line mode
  • 2.6. The secondary Loader
• 3. NPU
  • 3.1. RKNN Model
  • 3.2. RKNN-Toolkit-lite2
  • 3.3. Non-RKNN Model
  • 3.4. RKNN-Toolkit2
  • 3.5. Detailed Development Documents

Questions and answers

• 1. FAQS
  • 1.1. Build kernel, show “IO-Domain Checklist” Dialog
  • 1.2. RK3566 dual display
  • 1.3. Changes in kernel/buildroot configuration doesn’t take effect after compiling
  • 1.4. HDMI can’t display 4K?
  • 1.5. The 3.5mm headphone jack is connected to the national standard headphone abnormal?
  • 1.6. What should I do if the boot is abnormal and restarts cyclically?
  • 1.7. What is the default username and password for Ubuntu?
  • 1.8. Write number tool to write SN, MAC address
  • 1.9. On Ubuntu system, if there is no sound after plugging in headphones, what should I do?
  • 1.10. How to make the system crawl LOG under Android?
  • 1.11. Problems encountered in compiling boot.img of Android

Hardware resources

• Interface Definition
  • Machine interface definition