Upgrade from SD card

Introduction

This article mainly introduces how to use SD card to upgrade the system of the board EMMC, which needs to be selected according to the host operating system.

Preparatory work

  • AIO-3399PRO-JD4

  • Firmware

  • Computer host

  • Double male USB data cable

  • SD card

GO to the SD Firmware Tool download page to download SD_Firmware_Tool and decompression.

Run SD_Firmware_Tool.exe

_images/sdfirmwaretool.en.jpg

  1. Downloader the tool SD_Firmware

  2. You can modify the config.ini file, set Selected=1 to set the language to Chinese, and set Selected=2 to set the language to English.

  3. Insert SD card.

  4. Select the device corresponding to the SD card from the combo box.

  5. Check the SD startup option.

  6. Click the select firmware button and select the firmware in the file dialog box.

  7. Click the start creating button.

  8. The warning dialog box will be displayed, and select yes to ensure that the correct SD card device is selected.

  9. Wait for the completion of the operation until the prompt success dialog box appears: _images/sdfirmwaretool_done.en.jpg

  10. Unplug the SD card.