7. SATA转接板

AIO-3566JD4使用SATA硬盘时需要用到SATA转接板模块,SATA转接板模块适配Firefly具有FPC SATA接口的所有系列主板,可接2.5”或3.5” SSD/HDD。SATA转接板和AIO-3566JD4采用FPC排线连接,铝箔屏蔽,最大限度减少信号干扰

_images/TF-SATA-TRA_connection.jpg

7.1. SATA转接板模块实物图

  • SATA转接板正面 _images/TF-SATA-TRA_front.jpg

  • SATA转接板背面 _images/TF-SATA-TRA_back.jpg

7.2. AIO-3566JD4连接SATA硬盘

_images/TF-SATA-TRA_connect_mainboard.jpg

注意: 为防止烧坏的情况发生,板子请先断电再接上SATA硬盘

(公版固件默认关闭SATA功能)

7.3. 启用SATA功能

  • 由于AIO-3566JD4上SATA与M.2 PCIe功能复用,使能SATA修改如下:

--- a/kernel/arch/arm64/boot/dts/rockchip/rk3566-firefly-aiojd4.dtsi
+++ b/kernel/arch/arm64/boot/dts/rockchip/rk3566-firefly-aiojd4.dtsi
@@ -173,11 +173,11 @@
     pinctrl-names = "default";
     pinctrl-0 = <&pcie_reset_gpio>;
     /delete-property/ vpcie3v3-supply;
-    status = "okay";
+    status = "disabled";
 };

 &sata2 {
-    status = "disabled";
+    status = "okay";
 };