Quick Start

Components

Firefly-PX3-SE standard kit contains the following components:

1 Firefly-PX3-SE core board

1 Firefly-PX3-SE base board

1 WiFi antenna

Other optional components are:

Acrylic holder（to protect the main board）

5V/2.5A direct current power adapter(support 220V and 110V input)

Firefly debug serial module

Cooling fan suite (5V/0.12A)

Cooling fin suite

In addition, during the development process, you may need the
following components:

Display devices

A displayer or TV with an HDMI interface and a HDMI cable.

Network

100M/1000M Ethernet cable and wired Router

WiFi Router

Input devices:

USB touch screen

IR remote control

Gadgets for upgrading firmware and debugging:

Micro USB connection cable

Serial to USB adapter

Note: Firefly-PX3-SE Buildroot system does not support mouse, and you
need to prepare a touch screen to use it. Here we recommend a USB
Touch Screen， which works with Firefly-PX3-SE perfectly.

Shipping list


Power-on

Please make sure that all the main board components are connected
correctly and then connect the power adapter to a plug with power
supply. After that, connect the power adapter to the board. The board
will automatically power on for the first time connecting to power.
After power on the whole system, you can turn off the system via the
command "poweroff". And then you have two ways to power on the
Firefly-PX3-SE:

Long press the power button for 3 seconds

Click the poweron button on the IR remote control

While power-on, the blue power indicator will light up.

FAQ

Please check the

FAQ

 chapter for details.