Screen module

10.1 inch LVDS display module

Product parameters

model: HSX101H40C-L28A

size: 10.1 inch

resolution: 800x1280

display interface: LVDS

visual Angle: 170°

touch screen: multi-point capacitive touch

The officially released firmware and the firmware compiled by default
support LVDS display, which can be displayed normally when connected
to the screen.

Real figure

Wiring precautions:

TP interface: The TP interface on the LVDS wiring board is connected
to the TP interface on the backplane (the yellow port)

BL interface: The BL interface on the LVDS wiring board is connected
to the BL interface on the backplane (the red port)

LVDS interface: The BL interface on the LVDS wiring board is connected
to the BL interface on the backplane (note the direction of the power
interface, that is, the red line is VCC)

Connect to 12V jumper cap: There are three power jumper ports next to
the LVDS interface on the backplane. You need to use a jumper cap to
connect the 12V jumper port.