Compile Linux firmware
In order to facilitate the use and development of users, the official
Linux development kit SDK is provided. This chapter explains the
specific use of the SDK in detail.
Preparatory work
Set up compilation environment
Please confirm the installation of the following files!
Here is use Ubuntu 18.04 for testing(It is recommended to use the
ubuntu18.04 system for development, or use docker to deploy the
Ubuntu18.04 container, otherwise the environment package cannot be
installed):
sudo apt-get update
sudo apt-get install repo git-core gitk git-gui gcc-arm-linux-gnueabihf u-boot-tools device-tree-compiler \
gcc-aarch64-linux-gnu mtools parted libudev-dev libusb-1.0-0-dev python-linaro-image-tools \
linaro-image-tools gcc-arm-linux-gnueabihf libssl-dev liblz4-tool genext2fs lib32stdc++6 \
gcc-aarch64-linux-gnu g+conf autotools-dev libsigsegv2 m4 intltool libdrm-dev curl sed make \
binutils build-essential gcc g++ bash patch gzip bzip2 perl tar cpio python unzip rsync file bc wget \
libncurses5 libqt4-dev libglib2.0-dev libgtk2.0-dev libglade2-dev cvs git mercurial rsync openssh-client \
subversion asciidoc w3m dblatex graphviz python-matplotlib libssl-dev texinfo fakeroot \
libparse-yapp-perl default-jre patchutils swig chrpath diffstat gawk
Note:
Ubuntu 17.04 or higher systems also need the following dependency
packages:
sudo apt-get install lib32gcc-7-dev g++-7 libstdc++-7-dev
Download Firefly_Linux_SDK sub-volume compressed package
Since the Firefly_Linux_SDK source code package is relatively large,
some users' computers do not support files above 4G or the network
transmission of a single file is slow, so we use the method of sub-
volume compression to package the SDK. Users can obtain the
Firefly_Linux_SDK source code package in the following ways:
Firefly_Linux_SDK Source
After the download is complete, verify the MD5 code:
$ md5sum rk3399_linux_release_v2.5.1_20210301_split_dir/*firefly_split*
2cf71e64d35eb8083a4a0fc30c256484 rk3399_linux_release_v2.5.1_20210301_split_dir/rk3399_linux_release_v2.5.1_20210301_firefly_split.file0
f0e9292b3816a8f1ce0eb1eeb483ad56 rk3399_linux_release_v2.5.1_20210301_split_dir/rk3399_linux_release_v2.5.1_20210301_firefly_split.file1
c6aaa5d761d0e7917bea1cb78a0e7229 rk3399_linux_release_v2.5.1_20210301_split_dir/rk3399_linux_release_v2.5.1_20210301_firefly_split.file2
16022cc729d06a28fec30ac52885d91c rk3399_linux_release_v2.5.1_20210301_split_dir/rk3399_linux_release_v2.5.1_20210301_firefly_split.file3
565426354c01d56c7d48479dd7f3c35b rk3399_linux_release_v2.5.1_20210301_split_dir/rk3399_linux_release_v2.5.1_20210301_firefly_split.file4
313d311f1705fbfb7bfc45b7937ecf24 rk3399_linux_release_v2.5.1_20210301_split_dir/rk3399_linux_release_v2.5.1_20210301_firefly_split.file5
Unpack Firefly_Linux_SDK sub-volume compressed package
After confirming that it is correct, you can unpack:
cat rk3399_linux_release_v2.5.1_20210301_split_dir/*firefly_split* | tar -xzv
#This SDK folder contains a .repo directory, after decompression, perform the following operations in the current directory
cd rk3399_linux_release_v2.5.1_20210301
ls -al
.repo/repo/repo sync -l
.repo/repo/repo sync -c --no-tags
.repo/repo/repo start firefly --all
Update Firefly_Linux_SDK
You can use the following command to update the SDK later
.repo/repo/repo sync -c --no-tags
Linux_SDK catalog
catalog:
$ tree -L 1
.
├── app
├── buildroot # Buildroot root file system build directory
├── build.sh -> device/rockchip/common/build.sh # compile script
├── device # Compile related configuration files
├── docs # Documentation
├── envsetup.sh -> buildroot/build/envsetup.sh
├── external
├── kernel
├── Makefile -> buildroot/build/Makefile
├── mkfirmware.sh -> device/rockchip/common/mkfirmware.sh # link script
├── prebuilts # Cross compilation tool chain
├── rkbin
├── rkflash.sh -> device/rockchip/common/rkflash.sh # Flash script
├── tools # Tools directory
├── u-boot
└── yocto
Compile SDK
Configuration before compilation
The configuration file "aio-3399j-ubuntu.mk":
./build.sh aio-3399j-ubuntu.mk
#The file path: `device/rockchip/rk3399/aio-3399j-ubuntu.mk`
Effective configuration file will be connected to the
"device/rockchip/.BoardConfig.mk", check the file to verify that the
configuration was successful.
Note :
"aio-3399j-ubuntu.mk" is configuration file after compiled ubuntu
firmware. At the same time, users can also generate new configuration
files by referring to this configuration to adapt the firmware they
need.
Important configuration information :(if you need diy firmware, you
may need to modify the following configuration information)
#Uboot defconfig
export RK_UBOOT_DEFCONFIG=firefly-rk3399 # Compile the uboot configuration file
#Kernel defconfig
export RK_KERNEL_DEFCONFIG=firefly_linux_defconfig # Compile the kernel configuration file
#Kernel dts
export RK_KERNEL_DTS=rk3399-firefly-aio # Compile the DTS used by kernel
#parameter for GPT table
export RK_PARAMETER=parameter-ubuntu.txt # Partitioning information (very important)
#packagefile for make update image
export RK_PACKAGE_FILE=rk3399-ubuntu-package-file # Packaging configuration file
#rootfs image path
export RK_ROOTFS_IMG=xxxx/xxxx.img # The root file system image path
Attention, the following steps are very
important! !
Download the Ubuntu root filesystem image
Because RK3399 belongs to a 64-bit processor, so select the required
file system under the corresponding Linux Rootfs/arm64 folder. This
article uses rk3399_ubuntu18.04.img.7z as an example. Place the
resulting image at the root of the SDK:
Put the resulting image in the specified directory in SDK:
#Unpack
7z x rk3399_ubuntu18.04.img.7z
#The root directory of sdk
mkdir ubuntu_rootfs
mv rk3399_ubuntu18.04.img ubuntu_rootfs/
#Modify aio-3399j-ubuntu.mk :
vim device/rockchip/rk3399/aio-3399j-ubuntu.mk
#Change the RK_ROOTFS_IMG property to the ubuntu file system image path(such as rk3399_ubuntu18.04.img)
RK_ROOTFS_IMG=ubuntu_rootfs/rk3399_ubuntu18.04.img
NOTE
: Ubuntu root file system image storage path can not be wrong !!
Run "./mkfirmware.sh" will automatically update "rockdev/rootfs.img"
links.
Automatic compilation
Under the premise that the configuration and setting up of the
environment are completed:
./build.sh
Partial compilation
kernel
./build.sh kernel
Notice:
Linux SDK v2.5.1c
and later using extboot, please use "./build.sh extboot" to build
kernel
The output file is "SDK/kernel/extboot.img", use it instead of
boot.img
How to check SDK version:
The version format is vx.x.xx, eg: v2.5.1c
Firmware filename has SDK version(..._vx.x.xx_date.img)
Buildroot usecat /etc/versionto get
version(rk3399_linux_release_date_vx.x.xx.xml)
Ubuntu useffgo versionto get(rk3399_linux_release_date_vx.x.xx.xml)
In SDK check the link:ls -l .repo/manifests/rk3399_linux_release.xml
If you can't get version by methods above, that means you are using
old version, no support for extboot
Do not flash extboot.img into old version firmware!
Besides, extboot ubuntu support update kernel by deb package, please
see
Ubuntu Manual
u-boot
./build.sh uboot
recovery
recovery partition can be omitted, if necessary, compile it:
./build.sh recovery
rootfs
buildroot
./build.sh rootfs
Run "./mkfirmware.sh" will automatically update "rockdev/rootfs.img"
links.
Pack the firmware
Update the part images synchronously
Before each package firmware, ensure "rockdev/" directory file link is
correct:
ls -l
├── boot.img -> ~/project/linux_sdk/kernel/boot.img
├── idbloader.img -> ~/project/linux_sdk/u-boot/idbloader.img
├── linaro-rootfs.img
├── MiniLoaderAll.bin -> ~/project/linux_sdk/u-boot/rk3399_loader_v1.14.115.bin
├── misc.img -> ~/project/linux_sdk/device/rockchip/rockimg/wipe_all-misc.img
├── oem.img
├── parameter.txt -> ~/project/linux_sdk/device/rockchip/RK3399/parameter-ubuntu.txt
├── recovery.img -> ~/project/linux_sdk/buildroot/output/rockchip_rk3399_recovery/images/recovery.img
├── rootfs.img -> ~/project/linux_sdk/ubuntu_rootfs/rk3399_ubuntu18.04.img
├── trust.img -> ~/project/linux_sdk/u-boot/trust.img
├── uboot.img -> ~/project/linux_sdk/u-boot:/uboot.img
└── userdata.img
Runing "./mkfirmware.sh" to update links
./mkfirmware.sh
Tip:
If you do not compile all the partition images, you will encounter
the following situation when running "./mkfirmware":
error: /home/ljh/proj/linux-sdk/buildroot/output/rockchip_rk3399_recovery/images/recovery.img not found!
#Represents that the recovery partition has not compiled an image, and other situations are similar, such as oem.img, userdata.img. As mentioned above, these are elliptical partition images and can be ignored.
Packaged into a unified firmware
Note:
Please make sure "tools/linux/Linux_Pack_Firmware/rockdev/package-
file" is correct before packing. The packaging is partitioned based on
this file. This file link is updated when the "./build.sh aio-
rk3399c.mk" command is executed. If the configuration is not correct,
go back to the "Configuration before compilation" section and
configure it again.
Pack the firmware, the firmware will be saved to the directory
"rockdev/pack/".
RK firmware
RK firmware is the firmware packaged in Rockchip's proprietary format,
and can be flashed to eMMC or SD card with the tools provided by
Rockchip (
Note
: If there is no special instruction, the firmware mentioned on WIKI
defaults to RK firmware) .
# Pack RK firmware
./build.sh updateimg
RAW firmware
RAW firmware is a kind of firmware that can be flashed to the storage
device in a bit-by-bit copy mode, and is the original image of the
storage device. Different from the RK firmware, currently it only
supports flashing to SD card to boot with Etcher tool.
Etcher official download link
# Pack RAW firmware
./build.sh rawimg
Partition introduction
parameter
"parameter.txt" contains firmware partition information is very
important. You can find some "parameter.txt" files in
"device/rockchip/RK3399" directory. The following is introduced with
"parameter.txt" as an example:
FIRMWARE_VER: 1.0
MACHINE_MODEL: RK3399
MACHINE_ID: 007
MANUFACTURER: RK3399
MAGIC: 0x5041524B
ATAG: 0x00200800
MACHINE: 0xffffffff
CHECK_MASK: 0x80
PWR_HLD: 0,0,A,0,1
TYPE: GPT
CMDLINE: mtdparts=rk29xxnand:0x00002000@0x00004000(uboot),0x00002000@0x00006000(trust),0x00002000@0x00008000(misc),0x00040000@0x0000a000(boot:bootable),0x00040000@0x0004a000(recovery),0x00010000@0x0008a000(backup),0x00c00000@0x0009a000(rootfs),0x00040000@0x00c9a000(oem),-@0x00d1a000(userdata:grow)
uuid:rootfs=614e0000-0000-4b53-8000-1d28000054a9
"CMDLINE" property is what we care about. Take uboot as an example,
"0x00004000" in "0x00002000@0x00004000(uboot)" is the starting
position of the uboot partition, and "0x00002000" is the size of the
partition. The following partition rules are the same. Users can add
or subtract or modify partition information according to their needs,
but please keep at least the "uboot", "trust", "boot", "rootfs"
partition, which is a prerequisite for the machine to start normally.
The simplest partition scheme is used in "parameter-ubuntu.txt".
Partition introduction:
uboot:
Upgrade the
uboot.img
compiled by uboot.
trust:
Upgrade the
trust.img
compiled by uboot.
misc:
Upgrade the
misc.img
. Turn on and Enter
recovery
mode.(omitted)
boot:
Upgrade the
boot.img
compiled by kernel. Contains kernel and device tree information.
recovery:
Upgrade the
recovery.img
.(omitted)
backup:
Reserved. Not for the time being. In the future, it will be used
as
backup
of
recovery
just like Android.(omitted)
oem:
For manufacturers to use, used to store the manufacturer's app
or data. Read-only. Replace the data partition of the original
speaker. Mount in "/oem".(omitted)
rootfs:
Store the rootfs.img compiled by buildroot, Read-only.
userdata:
Save the files generated by the app or is for the end user. Read and
Write, Mount in "/userdata".(omitted)
package-file
This file should be consistent with the "parameter" and used for
firmware packaging. Relevant documents can be found under
"tools/linux/Linux_Pack_Firmware/rockdev".
# NAME Relative path
#
# HWDEF HWDEF
package-file package-file
bootloader Image/MiniLoaderAll.bin
parameter Image/parameter.txt
trust Image/trust.img
uboot Image/uboot.img
boot Image/boot.img
rootfs:grow Image/rootfs.img
backup RESERVED
The above is the mirror file generated after SDK compilation. Package
only the img files you use according to "parameter.txt".
FAQs
How to enter upgrade mode ?
See operation method in
Upgrade firmware