Screen module

7.85 MIPI LCD module

Note :

 the AIO-3399C motherboard does not carry the mipi_dsi interface by
default, and the hardware needs to be modified if this function is
needed. Please refer to

LCD driver section

 for details.

Product parameters

model: B080XAN01

size: 7.85 inch

resolution: 1024x768

display interface: MIPI

panel material: IPS panel

visual Angle: 160°

touch screen: multi-point capacitive touch

Compile command

Android 7.1 (Industry)

   ./FFTools/make.sh -j8 -d rk3399-firefly-aioc-mipi -l rk3399_firefly_aioc_mipi-userdebug
   ./FFTools/mkupdate/mkupdate.sh -l rk3399_firefly_aioc_mipi-userdebug

Android 7.1 (Box)

   ./FFTools/make.sh -j8 -d rk3399-firefly-aioc-mipi -l rk3399_firefly_aioc_mipi_box-userdebug
   ./FFTools/mkupdate/mkupdate.sh -l rk3399_firefly_aioc_mipi_box-userdebug

Real figure

Note: the voltage jumper in the figure below should use 12V.


10.1" LVDS module

Product parameters

model: HSX101H40C-L28A

size: 10.1 inch

resolution: 800x1280

display interface: LVDS

visual Angle: 170°

touch screen: multi-point capacitive touch

Refer to the firmware

Note: The official firmware name supporting the 10.1 screen has the
word "LVDS". Below is the link to the firmware: Firmware link

Compile command

Use the following command when compiling the 10.1-inch screen firmware
supported by the official website SDK:

Android 7.1 (Industry)

1.std version

   ./FFTools/make.sh -j8 -d rk3399-firefly-aioc-lvds-HSX101H40C -l rk3399_firefly_aioc_lvds-userdebug
   ./FFTools/mkupdate/mkupdate.sh -l rk3399_firefly_aioc_lvds-userdebug

2.AI version

   ./FFTools/make.sh -j8 -d rk3399-firefly-aioc-ai-lvds-HSX101H40C -l rk3399_firefly_aioc_ai_lvds-userdebug
   ./FFTools/mkupdate/mkupdate.sh -l rk3399_firefly_aioc_ai_lvds-userdebug

Android 7.1 (Box)

1.std version

   ./FFTools/make.sh -j8 -d rk3399-firefly-aioc-lvds-HSX101H40C -l rk3399_firefly_aioc_lvds_box-userdebug
   ./FFTools/mkupdate/mkupdate.sh -l rk3399_firefly_aioc_lvds_box-userdebug

2.AI version

   ./FFTools/make.sh -j8 -d rk3399-firefly-aioc-ai-lvds-HSX101H40C -l rk3399_firefly_aioc_ai_lvds_box-userdebug
   ./FFTools/mkupdate/mkupdate.sh -l rk3399_firefly_aioc_ai_lvds_box-userdebug

Android 8.1

   ./FFTools/make.sh -j8 -d rk3399-firefly-aioc-lvds-HSX101H40C -l rk3399_firefly_aioc_lvds_mid-userdebug
   ./FFTools/mkupdate/mkupdate.sh -l rk3399_firefly_aioc_lvds_mid-userdebug

Reference data

[schematic of screen module Datasheet& adapter board]

Real figure

Note: the voltage jumper in the figure below should use 12V.

7.85 "EDP LCD module

Product parameters

model: LP079QX1

size: 7.85 inch

resolution: 2048x1563

display interface: EDP

panel material: IPS panel

visual Angle: 160°

touch screen: multi-point capacitive touch

Refer to the firmware

Note:

 The official firmware name supporting the 7.85 screen has the word
"EDP785". Below is the link to the firmware :

Firmware link

Compile command

Use the following command when compiling the 7.85-inch screen firmware
supported by the official website SDK:

Android 7.1 (Industry)

    ./FFTools/make.sh -j8 -d rk3399-firefly-aioc-edp -l rk3399_firefly_aioc_edp-userdebug
     /FFTools/mkupdate/mkupdate.sh -l rk3399_firefly_aioc_edp-userdebug

Android 7.1 (Box)

    ./FFTools/make.sh -j8 -d rk3399-firefly-aioc-edp -l rk3399_firefly_aioc_edp_box-userdebug
     /FFTools/mkupdate/mkupdate.sh -l rk3399_firefly_aioc_edp_box-userdebug

Technical data

7.85" screen module DataSheet & Floor schematic diagram

Real figure


Connection methods

Note:

 the voltage jumper in the figure below will use 5V, and a wrong
connection to 12V will burn the screen chip